Jandy Jandy Pro Series Kullanıcı El Kitabı - Sayfa 9

Yüzme Havuzu Filtresi Jandy Jandy Pro Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Jandy Jandy Pro Series 20 sayfaları. Single element cartridge pool & spa cs filters
Ayrıca Jandy Jandy Pro Series için: Kullanıcı El Kitabı (12 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum ve Kullanım Kılavuzu (20 sayfalar), Manuel (8 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kurulum ve Kullanım Kılavuzu (20 sayfalar), Kurulum Talimatları (2 sayfalar), Kurulum ve Kullanım Kılavuzu (16 sayfalar), Kurulum ve Kullanım Kılavuzu (16 sayfalar), Kurulum ve Kullanım Kılavuzu (16 sayfalar)

Sayfayı Yazdır
Jandy Jandy Pro Series Kullanıcı El Kitabı
Nicheless Underwater LED Lights | Owner's Manual
4.2

Wire Gauge and Length

Jandy
Pro Series Nicheless Underwater LED Lights are low voltage
®
fixtures. Improper wire gauge and wire length can effect the performance
of these products. Follow the guidelines below to determine the proper
operation and optimum performance of the lights.
Voltages are determined by the measured voltage level at the Bus Bar where
the transformer and cords are connected.
NOTE: Each color mode has a slightly different power draw
6W & 12W lights: Min/Max Voltage per cord length
Cord Length
50 Feet
100 Feet
150 Feet
24W Lights: Min/Max Voltage per cord length
Cord Length
50 Feet
100 Feet
150 Feet
Table 2.
Jandy
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION,
which could result in serious injury or death.
Circuit Interrupter (GFCI) for 120 Volt transformers should be used if
required by the transformer manufacturer or if required by the local
applicable code and/or Authority Having Jurisdiction (AHJ). When
a GFCI is used, the conductors on the load side of the GFCI circuit
shall not occupy conduit, boxes, or enclosures containing other
conductors unless the additional conductors are also protected by a
GFCI. Refer to local codes for complete details.
CAUTION
Min. Voltage
9.4VAC
10.7VAC
11.82VAC
Min. Voltage
10.34VAC
10.9VAC
11.43VAC
Pro Series LED Light Voltage Min/Max Levels
®
WARNING
ENGLISH
Max. Voltage
12.4VAC
13.2VAC
13.8VAC
Max. Voltage
12.56VAC
13.5VAC
14.1VAC
A Ground Fault
Page 9