Gardena Classic 3500/4 Kullanım Talimatları Kılavuzu - Sayfa 4

Su Pompası Gardena Classic 3500/4 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena Classic 3500/4 15 sayfaları. Garden pump
Ayrıca Gardena Classic 3500/4 için: Operatör El Kitabı (10 sayfalar), Operatör El Kitabı (11 sayfalar), Kullanım Talimatları Kılavuzu (14 sayfalar), Kullanım Talimatları Kılavuzu (10 sayfalar), Kullanım Talimatları Kılavuzu (7 sayfalar), Operatör El Kitabı (9 sayfalar), Operatör El Kitabı (10 sayfalar)

Gardena Classic 3500/4 Kullanım Talimatları Kılavuzu
Pumping dirty water, e.g. stones, pine needles
etc., can cause damage to the pump.
v Do not pump dirty water.

3. Initial Operation

Setting up your Garden Pump:
Connecting hose to
suction side:
2
1
Connection hose to
delivery side:
5
4
3
z
The minimum flow rate is 90 l/h (= 1.5 l/min.).
Watering accessories with lower rate must not
be operated.
The site must be firm and solid in order to ensure safe and sturdy
operating conditions for the pump.
v Position the pump at a safe distance (min. 2 m) from the liquid
to be pumped.
The pump must be installed in a location with low air humidity
and sufficient ventilation in the area of the ventilation slots.
It must be at a distance of at least 5 cm from the walls.
No dirtcontamination (e.g. sand or earth) may be sucked in
through theventilation slots.
Don't use any hose connection system fittings on the
suction side! A vacuum-resistant suction hose must be used,
e. g. GARDENA Suction Unit, art. no. 1411.
In order to reduce the suction time, it is advisable to use a suction
hose with backflow preventer avoiding automatic draining of the
suction hose when the pump is stopped.
1. Screw a vacuum-resistant suction hose
connector on the suction side of the pump
2. For suction heights exceeding 4 m also secure the suction
hose
(e.g. by fastening it to a wooden post).
1
This relieves the pump of the weight of the suction hose.
The 3500/4 pump has 2 connections
The pump connection not in use has to be closed by the cap
which can be unscrewed for connecting 2 hoses.
The pump connections
thread which can be used to connect 13 mm (1/2"), 16 mm (5/8")
or 19 mm (3/4") hoses via the GARDENA hose connection system.
Optimised use of the pump capacity is achieved by connecting
19 mm (3/4") hoses with e.g. GARDENA Pump Connection Set
Art. 1752, or by connecting 25 mm (1") hoses with GARDENA
Quick Thread Coupling with female thread Art. 7109 / Quick
Coupling Hose Connector Art. 7103.
v Connect the pressure hose
side
/
.
3
ß
3a
If more than 2 (3000/4 more than 1) hoses / accessories are
connected simultaneously, we recommend using the
GARDENA 2- or 4-Channel Water Distributor Art. 8193/8194,
GARDENA Twin-Tap Connector Art. 940 which can be screwed
directly onto the connection on the delivery side
airtight onto the
1
2
/
on the delivery side.
3
ß
3a
/
are equipped with a 33.3 mm (G 1")
3
ß
3a
to the connector on the delivery
5
.
,
4
/
.
3
ß
3a
13