Broadata Link Bridge LBC-HDMI-R-WP Kullanıcı Kılavuzu - Sayfa 10

Alıcı Broadata Link Bridge LBC-HDMI-R-WP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Broadata Link Bridge LBC-HDMI-R-WP 20 sayfaları. Hdmi wall plate hdbaset transmission system

Sayfayı Yazdır

Link Bridge

3.0 DC POWER CONNECTION

Congratulations! You are now ready to power up the LBC-HDMI-T/R-WP

and set up your network connection. In order to make sure that you

have a proper installation, please observe the following:

Your AC jack has power.

The 24VDC power supply is working.

Your electrical system has proper grounding (this ensures that

your power supply does not suffer from voltage variations).

Power Surge Protection. This is optional, but highly

recommended. A UPS system provides voltage regularity as

well as prevents spikes from occurring, thus protecting your

LBH-HDMI-T/R-WP from sensitive voltage conditions.

The LBC-HDMI-T/R-WP derives power from an external 24VDC power

supply or via PoH (Power over HDBaseT). This power supply is a wall

mounted AC/DC adapter, 100-240 VAC, 50-60 Hz, at 1.0A. This power

supply comes standard for the LBC-HDMI-T/R-WP unless otherwise

specified. To provide power to the LBC-H/V-T-WP, simply connect the

power cord, already provided with the units, and connect it to the wall

jack. (You will find one power cord per unit). Once the power cord has

been connected to the wall jack, connect 24VDC to the unit and the unit

should power up immediately. If you have any problems or concerns,

regarding the installation, make sure that you have taken the proper

steps to ensure a proper power connection. Otherwise, feel free to

Broadata Technical Support, [email protected]

LBC-HDMI-T/R-WP User's Manual

HDMI Wall Plate HDBaseT Transmission System