Lexmark E360D series Tamamlayıcı Kılavuz - Sayfa 4

Yazıcı Lexmark E360D series için çevrimiçi göz atın veya pdf Tamamlayıcı Kılavuz indirin. Lexmark E360D series 5 sayfaları. Loading paper
Ayrıca Lexmark E360D series için: Kurulum ve Kurulum (2 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Hızlı Referans (2 sayfalar), Sorun Giderme Kılavuzu (8 sayfalar), (Almanca) Tamamlayıcı Kılavuz (9 sayfalar)

Sayfayı Yazdır
Lexmark E360D series Tamamlayıcı Kılavuz

231 paper jam

CAUTION—HOT SURFACE: The fuser and the inside of the
printer near the fuser may be hot. To reduce the risk of injury
from a hot component, allow the surface to cool before
removing paper from this area.
1
Open the front door.
2
Open the rear door.
3
Remove the jam.
4
Close the rear door.
5
Close the front door.
6
Press
.
233 paper jam
1
Remove the tray from the printer.
2
Locate the lever shown. Pull the level down to release the jam.
4
3
Pull the jammed sheets from the duplex area.
4
Insert the tray.
5
Press
.
If this does not clear the jam, complete the steps in "231 paper
jam" on page 4.
234 paper jam
A single jam or multiple jams are in the duplex area of the printer
when the printer is turned on. To locate and remove the jammed
sheets, complete all the steps in:
•
"231 paper jam" on page 4
•
"233 paper jam" on page 4