Lexmark E360D series 보충 설명서 - 페이지 4
{카테고리_이름} Lexmark E360D series에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark E360D series 5 페이지. Loading paper
Lexmark E360D series에 대해서도 마찬가지입니다: 설정 및 설치 (2 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (4 페이지), 빠른 참조 (2 페이지), 문제 해결 매뉴얼 (8 페이지), (독일어) 보충 설명서 (9 페이지)
페이지 인쇄
231 paper jam
CAUTION—HOT SURFACE: The fuser and the inside of the
printer near the fuser may be hot. To reduce the risk of injury
from a hot component, allow the surface to cool before
removing paper from this area.
1
Open the front door.
2
Open the rear door.
3
Remove the jam.
4
Close the rear door.
5
Close the front door.
6
Press
.
233 paper jam
1
Remove the tray from the printer.
2
Locate the lever shown. Pull the level down to release the jam.
4
3
Pull the jammed sheets from the duplex area.
4
Insert the tray.
5
Press
.
If this does not clear the jam, complete the steps in "231 paper
jam" on page 4.
234 paper jam
A single jam or multiple jams are in the duplex area of the printer
when the printer is turned on. To locate and remove the jammed
sheets, complete all the steps in:
•
"231 paper jam" on page 4
•
"233 paper jam" on page 4