Gardena 1825 Kullanım Talimatları Kılavuzu - Sayfa 3

Çim ve Bahçe Ekipmanları Gardena 1825 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena 1825 10 sayfaları. Water timer electronic
Ayrıca Gardena 1825 için: Kullanım Talimatları Kılavuzu (20 sayfalar), Kullanım Talimatları Kılavuzu (10 sayfalar), Kullanım Talimatları Kılavuzu (20 sayfalar)

Battery :

For functional safety reasons, only use a 9 V alkali-manga-

nese (alkaline) battery type IEC 6LR61.

The Water Timer will only run for approx. 1 year if the new

alkaline battery has a nominal voltage of at least 9 V.

v Check the battery before you buy it.

Putting your Water Timer

To prevent water entering the battery compartment, the Water

into operation :

Timer must only be mounted in a perpendicular position with

the sleeve nut pointing upwards.

After you have selected the watering program, the Water Timer

opens at the selected starting time. To avoid getting wet when

operating the Water Timer, connect the hose or turn off the tap

before selecting the program. Alternatively, the control unit can

be removed for programming.

Water flow :

The max. temperature for the water is 40 °C.

v Only use clear fresh water.

3. Function

Control knob and OK button :

The GARDENA Water Timer electronic allows you to set different

watering cycles for different watering times independent of whether

you are using a sprinkler, a sprinkler system installation or drip-

head watering system to irrigate your garden.

Your Water Timer electronic will water your garden completely

automatically according to the program you choose. You can set

the timer to water your garden early in the morning or late at

night when water evaporates the least, or while you are away on

holiday.

You simply program the time (to the nearest hour), watering start-

ing time / duration and cycle by turning the pointer

Control knob

trol knob

Control knob pointer

The Water Timer opens at the starting time you have selected.

OK button

Battery status display :

The 3 LEDs Time, Start Time and

Frequency flash to indicate that the

battery is flat.

v Replace the battery

(see 4. Operation "Inserting the

Battery").

to the correct time and pressing the OK button

of the con-