Gardena 1892 Operatör El Kitabı - Sayfa 7

Çim ve Bahçe Ekipmanları Gardena 1892 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Gardena 1892 18 sayfaları. Water control
Ayrıca Gardena 1892 için: Operatör El Kitabı (19 sayfalar), Operatör El Kitabı (19 sayfalar)

Sayfayı Yazdır

1. Initial Operation

Active (manual) watering v (Fig. I):

1 Manual watering

Setting schedules v (Fig. H):

1 Set schedule | 2 Schedule 1

Configure and save up to 6 different watering

schedules by setting the start time, duration and

weekdays for each one. Schedules can be acti-

vated or deactivated by pressing on / off (see fig. H).

Default display v (Fig. J):

1 Idle screen | 2 Programs

Seasonal watering duration v (Fig. K):

1 Menu: Seasonal Run Time | 2 Regular Run Time |

3 Reduce Watering

You can reduce the durations set for all schedules

at once in 10% increments, from 100% down

to 10%. This saves you having to change each

of the 6 schedules individually.

Tip: Less watering is required in the spring and

autumn than in the height of summer. Simply set

the maximum watering duration for high summer

as the default. Then reduce the watering duration

for all schedules at once in convenient 10 % incre-

ments when there is less need for watering.

Note: When you change the percentage, the dura-

tion is adjusted within the schedules and the

"cloud" symbol appears. If the duration is not

altered (= 100 %), the "sun" symbol is displayed.

Rain pause v (Fig. L):

1 Menu: Rain pause | 2 Pause / 3 days

Pauses all watering operations without changing

the set schedules. You can select any number of

days between 1 and 9. At the end of the pause,

all schedules are reactivated.

Deleting a schedule v (Fig. M):

1 Menu: Delete schedule | 2 Delete schedule 1

Soil Moisture Sensor, Art. 1188

(optionally available) v (Fig. D and N):

1 Menu: Soil Moisture Sensor

Once the soil is sufficiently moist, a water-

ing operation is interrupted or a schedule is disa-

bled so that it cannot be activated. This does not

affect active (manual) watering.

v (Fig. D and N):

1 Connect soil moisture sensor

After a soil moisture sensor is connected, the

"sensor activated / deactivated" display will appear –

this can take up to 1 minute. Select an option to

activate/deactivate the sensor response. Use the

switching point controller on the soil moisture sen-

sor to set the level of soil moisture that must be

achieved before the sensor responds (see Opera-

tor's Manual for GARDENA Soil moisture sensor).