Lexmark MS810n Manuel - Sayfa 12

Yazıcı Lexmark MS810n için çevrimiçi göz atın veya pdf Manuel indirin. Lexmark MS810n 20 sayfaları. Ms810 series monochrome laser printer
Ayrıca Lexmark MS810n için: Bağlantı Kılavuzu (6 sayfalar), Bilgi Kılavuzu (1 sayfalar), Taşıma Kılavuzu (3 sayfalar), Kağıt El Kitabı (4 sayfalar), Menü Haritası (3 sayfalar), Kurulum Sayfası (2 sayfalar), Baskı Hataları Kılavuzu (1 sayfalar), Manuel (17 sayfalar), Baskı Kılavuzu (18 sayfalar), Mono Kalite El Kitabı (1 sayfalar), Ürün Özellikleri (2 sayfalar), Ürün Özellikleri (2 sayfalar)

Sayfayı Yazdır
Lexmark MS810n Manuel
Action
Step 2
a
Replace the fuser if the distance between the defects is equal to either of
the following:
•
87.9–92.7 mm (3.46–3.65 in.)
•
95.2 mm (3.75 in.)
b
Resend the print job.
Do repeating defects still appear on prints?

Shadow images appear on prints

Leading edge
A B C D
A B C D
A B C D
A B C D
Trailing edge
Action
Step 1
Load paper with the correct paper type and weight in the tray.
Is paper with the correct paper type and weight loaded in the tray?
Step 2
From the printer control panel, set the paper type and weight in the Paper menu
to match the paper loaded in the tray.
Is the tray set to the type and weight of the paper loaded?
Step 3
a
Depending on your operating system, specify the paper type and weight
from Printing Preferences or from the Print dialog.
b
Resend the print job.
Do shadow images still appear on prints?
Step 4
Replace the imaging unit, and then resend the print job.
Do shadow images still appear on prints?
Print quality Guide
Page 12 of 19
Yes
No
Contact
customer
The problem is solved.
support.
Yes
No
Go to step 2.
Load paper with the
correct paper type and
weight in the tray.
Go to step 3.
Change the paper loaded
in the tray to match the
paper type and weight
specified in the tray
settings.
Go to step 4.
The problem is solved.
Contact
customer
The problem is solved.
support.