Makita 6211DH Kullanım Kılavuzu - Sayfa 7

Matkap Makita 6211DH için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 6211DH 15 sayfaları. Cordless driver drill equipped with electric brake

Sayfayı Yazdır

Installing or removing driver bit or drill bit

CAUTION :

Always be sure

that

the tool is switched off and

the

battery cartridge

removed before

installing or removing the bit.

Hold the ring and turn the

sleeve

counter-

clockwise to open the chuck jaws. Place

the bit in the chuck as far as it will go.

Hold the ring firmly and turn the

sleeve

clockwise to tighten the chuck.

To remove the bit, hold the ring and turn

the

sleeve

counterclockwise.

Sleeve

Switch action

Tool speed i s increased

increasing pres-

sure on the trigger. To start the tool, simply

pull the trigger. Release the trigger to stop.

CAUTION

Before inserting the battery cartridge into the tool, always check to

see

that the switch

trigger actuates properly and returns to the "OFF" position when released.

Reversing switch action

This tool has

reversing switch to change

the direction of rotation. Slide the revers-

ing switch to the left for clockwise rota-

tion or to the right for counterclockwise.

CAUTION :

Always check the direction of rotation before operation.

*Move the reversing switch only after the tool comes to a complete stop. Changing the

direction of rotation before the tool stops may damage the tool.