AEG B3007H-B Kullanıcı Kılavuzu - Sayfa 21

Fırın AEG B3007H-B için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG B3007H-B 39 sayfaları. 30” built-in oven

Self Cleaning Panels

The range is equipped with 3 panels (2 sides and rear). They are attached to the sides by

removing the rack guide assembly and placing the self cleaning panels against the oven side.

The rear panel is attached with screws, ensure that the «rough» side is facing out. These liners

are «self cleaning» during the cooking. If residue remains on them after cooking, empty the oven

of food, and remove all shelves and pan, and turn the selector to Conventional oven (top and

bottom element) and thermostat to MAX; 15-20 minutes should be adequate to clean the panels

using this method.

The self-cleaning oven panels go through a special enamelling process which ultimately creates a

rough surface (this is the side which should face outwards in the oven). Because of the structure

of the surface, it is extremely porous and attracts oxygen. When the splashes of grease hit this

surface it immediately spreads. In this way, immediate oxidization of the grease occurs, and it

ultimately disappears while the oven is in general use at standard cooking temperatures. The self

cleaning panels are located on the sides and on the rear of the oven, and are designed to cope

with fatty stains very efficiently. For stains on the bottom of the oven, the usual causes are sugar

or starch overflows.

The self cleaning panels are manufactured using a special enamelling process.

The base of the oven should cleaned by using soapy water (see procedure on pages 22-23) with

a soft clean cloth or sponge and newspaper.

BEWARE: Never use silicone films (polish or cleaners) on self-cleaning panels - they will

be rendered useless. Similarly, NEVER try to wash with detergent, or use abrasive

cleaners on the panels

The removal of a single screw at the front of the upper grill element allows the grill to drop down

to facilitate the cleaning of the oven ceiling. On completion of cleaning, simply replace the grill

element and secure with the screw.

To avoid smoking, use a clean, damp cloth to regularly clean oil and fat splatters from

the exposed drop down grilling element.

The fan cover can be lifted out for cleaning separately by removing the retaining screws on the

rear panel. The fan blade can also be removed for cleaning if necessary.

NOTE: The fan blade nut has a left-handed thread.