Garmin XERO C1 Kullanıcı El Kitabı - Sayfa 7

İzle Garmin XERO C1 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin XERO C1 20 sayfaları.

For best results, you should always follow these alignment considerations while using your chronograph.

• Always observe the position diagram for your projectile type.

• Always ensure the large, flat side of the chronograph is pointed at the target and the screen is facing you.

• Always ensure the chronograph has an unobstructed view of the target.

• Always ensure the projectile can travel at least 20 meters or 20 yards in front of the chronograph.

Always ensure that you position the chronograph so that it is not directly exposed to ejecting cartridge cases,

muzzle blast, or other hazards that may damage the chronograph.

When you use the chronograph for archery, you should use a target that is at least 4 meters or 4 yards away

from you.

1 Select NEW SESSION > BOW.

2 If you have enabled the PROJECTILE WEIGHT ENTRY setting

• To calculate the kinetic energy and power factor of your arrow, select YES, and enter the weight of your

arrow.

• To continue without calculating kinetic energy and power factor, select SKIP.

3 If necessary, observe the alignment diagram, and press OK to continue.

4 Point the chronograph at the target with the screen facing you.

5 Hold the bow over the chronograph so the arrow is 15 to 35 cm (5 to 15 in.) above the chronograph

The device detects shots and displays measurements automatically as you shoot. The measured velocity is the

speed of the arrow as it passes over the chronograph.

Recording Shot Data

NOTICE

(Pro Settings,

page 11), select an option: