Garmin XERO C1 Kullanıcı El Kitabı - Sayfa 8

İzle Garmin XERO C1 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin XERO C1 20 sayfaları.

Starting a Rifle Session

Always ensure you position the chronograph so that it is not directly exposed to ejecting cartridge cases,

muzzle blast, or other hazards that may damage the chronograph.

1 Select NEW SESSION > RIFLE.

2 Select a velocity range.

3 If you have enabled the PROJECTILE WEIGHT ENTRY setting

• To calculate the kinetic energy and power factor of your bullet, select YES, and enter the weight of your

bullet.

• To continue without calculating kinetic energy and power factor, select SKIP.

4 If necessary, observe the alignment diagram and press OK to continue.

5 Position the rifle next to the chronograph, within 15 to 35 cm (5 to 15 in.) of the chronograph

the chronograph is 15 to 35 cm (5 to 15 in.) behind the muzzle

NOTE: The chronograph can be positioned on either side of the rifle.

6 Point the chronograph at the target with the screen facing you.

The device detects shots and displays measurements automatically as you shoot.

NOTICE

(Pro Settings,

page 11), select an option:

, and ensure

Recording Shot Data