Garmin GTN 625 Etkinleştirme Talimatları - Sayfa 20

Araç Navigasyon sistemi Garmin GTN 625 için çevrimiçi göz atın veya pdf Etkinleştirme Talimatları indirin. Garmin GTN 625 46 sayfaları. Gps/sbas navigation system as installed in cessna 172r
Ayrıca Garmin GTN 625 için: Kullanıcı Kılavuzu (20 sayfalar), Kılavuz Eki (31 sayfalar), Errata (4 sayfalar), Kullanıcı Kılavuzu (22 sayfalar), Uçuş El Kitabı (49 sayfalar), Pilot El Kitabı (28 sayfalar)

Sayfayı Yazdır
Garmin GTN 625 Etkinleştirme Talimatları
5. Refer to Table 4-1 to read the SAT ID/CONNECTIVITY information.
6. Verify radio IDs and signal quality is between 2 – 3. If signal quality is zero, check the antenna and
wiring.
„- -„
„XM‟
„X0‟, „X1‟, „X2‟, or „X3‟
„-0‟, „-1‟, „-2‟, or „-3‟
"Searching..."
"Satellite in view"

4.3 Verify XM Subscribed Services

The 430/530 supports the following weather services: NEXRAD, graphical METAR, text-based
METAR, Wind, and Graphical Temperature/Dew Point. These services are available only in the
United States. Verify included services by displaying them on the unit, if applicable. If signal quality is
between 1 and 3, but no data is displayed, contact XM Satellite Radio to verify subscription. Be sure that
the unit is updated with the most current software.
Page 14
GDL 69/69A XM Satellite Radio Activation Procedures

Figure 4-2. Data Link Status Page

Table 4-1. Data Link Status

SAT ID Field
GDL 69/69H – 430/530 Series interface communications not yet established.
GDL 69/69H not yet communicating with internal satellite radio hardware (normal
during power-up).
„X‟ = Satellite radio service activated. Satellite signal quality is indicated by the
numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.
„-‟ = Satellite radio service is not activated. Satellite signal quality is indicated by
the numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.
Connectivity Field
No satellite is currently in view, signal quality is „0‟.
Indicates a signal quality between 1 and 3.
190-00355-04
Rev. J