Garmin GTX 330 Pilot El Kitabı - Sayfa 6

Aviyonik Ekran Garmin GTX 330 için çevrimiçi göz atın veya pdf Pilot El Kitabı indirin. Garmin GTX 330 13 sayfaları. Equipment supplement
Ayrıca Garmin GTX 330 için: Pilot El Kitabı Eki (50 sayfalar), Pilot El Kitabı Eki (50 sayfalar), Pilot El Kitabı (12 sayfalar), Pilot El Kitabı (13 sayfalar), Pilot El Kitabı (8 sayfalar), Pilot El Kitabı (6 sayfalar), Manuel (8 sayfalar), Kurulum Kılavuzu (49 sayfalar)

Function Display

NOTE: GTX 330 options are normally set at time of installation. For changes

to the GTX 330 parameters, contact your Garmin authorized dealer.

CRSR Initiates starting time entry for the Count Down timer and

cancels transponder code entry.

CLR Resets the Count Up, Count Down, and Flight timers. Cancels

the previous keypress during code selection and Count Down entry.

Returns cursor to the fourth code digit within five seconds after entry.

8 Reduces Contrast and Display Brightness when the respective fields

are displayed (dependent upon installation configuration) and enters

the number eight into the Count Down timer.

9 Increases Contrast and Display Brightness when the respective

fields are displayed (dependent upon installation configuration) and

enters the number nine into the Count Down timer.

FLIGHT ID: Displays the Flight ID. The CRSR key opens the Flight

ID entry dialog if the 'ALLOW PILOT TO EDIT FLT ID' option is en-

abled during installation configuration.

PRESSURE ALT: Displays the altitude data supplied to the GTX 330

in feet, hundreds of feet (i.e., flight level), or meters (dependent upon

installation configuration).

FLIGHT TIME: Timer start is configured as either Manual or Au-

tomatic. When Manual, displays the Flight Time, controlled by the

START/STOP and CLR keys. When Automatic, the timer begins when

takeoff is sensed.

ALTITUDE MONITOR: Controlled by START/STOP key. Activates

a voice alarm and warning annunciator when altitude limit is exceed-

ed.

OAT/DALT: Displayed when the GTX 330 is configured with tem-

perature input. Displays Outside Air Temperature and Density Alti-

tude.

COUNT UP TIMER: Controlled by START/STOP and CLR keys.

COUNT DOWN TIMER: Controlled by START/STOP, CLR, and

CRSR keys. The initial Count Down time is entered with the 0 – 9

keys.