Garmin Fishfinder 240 Blue Kullanıcı El Kitabı - Sayfa 10

Deniz GPS Sistemi Garmin Fishfinder 240 Blue için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin Fishfinder 240 Blue 50 sayfaları. Garmin fishfinder 160 blue owner's manual
Ayrıca Garmin Fishfinder 240 Blue için: Kullanıcı El Kitabı (50 sayfalar), Pilot El Kitabı (12 sayfalar), Teknik Özellikler (2 sayfalar), Teknik Özellikler (2 sayfalar), Kullanıcı El Kitabı (50 sayfalar), Kullanıcı El Kitabı (50 sayfalar)

Installation

Mounting the Transducer

DO NOT mount the transducer behind strakes,

struts, ﬁ ttings, water intake or discharge ports, or

anything that creates air bubbles or causes the

water to become turbulent. It is important that

the transducer be in calm, non turbulent water for

optimal performance.

Proper transducer installation is key to getting the best performance

from your new unit. If the transducer lead is too short, extension cables

are available from you GARMIN dealer. DO NOT cut the transducer lead,

this will void your warranty.

Following are some tips and basic installation instructions for three popu-

lar transducers. Detailed installation instructions are provided in the trans-

ducer kits.

Transom Mount Installation

010-10248-00 (depth/temp) Transom Mount Transducer.

Apply marine sealant to all

screw threads to prevent water

from seeping into the transom.

Mount the transducer parallel with the bottom.

Mount the transducer cable cover

well above the waterline.

Transducer should extend 1/8" below

fiberglass hull or 3/8" below aluminum hull

Make sure that the transducer is

below water level when the boat

is on plane at high speed

Do not mount transducer directly in the

path of the prop. The transducer can cause

cavitation that may degrade the boat's performance

and damage the prop.