Garmin Fishfinder 240 Blue Kullanıcı El Kitabı - Sayfa 12

Deniz GPS Sistemi Garmin Fishfinder 240 Blue için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin Fishfinder 240 Blue 50 sayfaları. Garmin fishfinder 160 blue owner's manual
Ayrıca Garmin Fishfinder 240 Blue için: Kullanıcı El Kitabı (50 sayfalar), Pilot El Kitabı (12 sayfalar), Teknik Özellikler (2 sayfalar), Teknik Özellikler (2 sayfalar), Kullanıcı El Kitabı (50 sayfalar), Kullanıcı El Kitabı (50 sayfalar)

Installation

Mounting the Transducer

Worm Gear

Slide clamp band through slot in bracket

Trolling Motor Installation

Included in the 010-10251-00 transducer kit you should have:

• Worm Gear Clamp

• Cable Ties

• Transducer

Mounting the Transducer:

1. Loosen the Worm Gear Clamp until end of the band is clear of the worm

gear.

Cable Ties

2. Slide the clamp band through the slots on the transducer.

3. Place the free end of the clamp band into the worm gear and tighten

until the band is through the worm gear.

4. Place the clamp and transducer over the body of the trolling motor.

Finish tightening the clamp to secure the transducer to the trolling

Clamp Band

motor.

5. Secure the transducer cable to the trolling motor shaft using the sup-

plied cable ties.

If you are experiencing interference while the trolling motor is operating, try

installing the transducer cable at right angles to the trolling motor power

cables.