Garmin Fishfinder 240 Blue Panduan Pemilik - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem GPS Kelautan Garmin Fishfinder 240 Blue. Garmin Fishfinder 240 Blue 50 halaman. Garmin fishfinder 160 blue owner's manual
Juga untuk Garmin Fishfinder 240 Blue: Panduan Pemilik (50 halaman), Panduan Pilot (12 halaman), Spesifikasi (2 halaman), Spesifikasi (2 halaman), Panduan Pemilik (50 halaman), Panduan Pemilik (50 halaman)

Halaman Cetak

Garmin Fishfinder 240 Blue Panduan Pemilik

Installation

Mounting the Transducer

Worm Gear

Slide clamp band through slot in bracket

Trolling Motor Installation

Included in the 010-10251-00 transducer kit you should have:

• Worm Gear Clamp

• Cable Ties

• Transducer

Mounting the Transducer:

1. Loosen the Worm Gear Clamp until end of the band is clear of the worm

gear.

Cable Ties

2. Slide the clamp band through the slots on the transducer.

3. Place the free end of the clamp band into the worm gear and tighten

until the band is through the worm gear.

4. Place the clamp and transducer over the body of the trolling motor.

Finish tightening the clamp to secure the transducer to the trolling

Clamp Band

motor.

5. Secure the transducer cable to the trolling motor shaft using the sup-

plied cable ties.

If you are experiencing interference while the trolling motor is operating, try

installing the transducer cable at right angles to the trolling motor power

cables.