- ページ 12

船舶用GPSシステム Garmin Fishfinder 240 BlueのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin Fishfinder 240 Blue 50 ページ。 Garmin fishfinder 160 blue owner's manual
Garmin Fishfinder 240 Blue にも：オーナーズマニュアル (50 ページ), パイロット・マニュアル (12 ページ), 仕様 (2 ページ), 仕様 (2 ページ), オーナーズマニュアル (50 ページ), オーナーズマニュアル (50 ページ)

Installation

Mounting the Transducer

Worm Gear

Slide clamp band through slot in bracket

Trolling Motor Installation

Included in the 010-10251-00 transducer kit you should have:

• Worm Gear Clamp

• Cable Ties

• Transducer

Mounting the Transducer:

1. Loosen the Worm Gear Clamp until end of the band is clear of the worm

gear.

Cable Ties

2. Slide the clamp band through the slots on the transducer.

3. Place the free end of the clamp band into the worm gear and tighten

until the band is through the worm gear.

4. Place the clamp and transducer over the body of the trolling motor.

Finish tightening the clamp to secure the transducer to the trolling

Clamp Band

motor.

5. Secure the transducer cable to the trolling motor shaft using the sup-

plied cable ties.

If you are experiencing interference while the trolling motor is operating, try

installing the transducer cable at right angles to the trolling motor power

cables.