Garmin GPSMAP 8000 Series Kullanıcı El Kitabı - Sayfa 8

Deniz GPS Sistemi Garmin GPSMAP 8000 Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin GPSMAP 8000 Series 43 sayfaları. Installation instructions
Ayrıca Garmin GPSMAP 8000 Series için: Kullanıcı El Kitabı (36 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Talimatlar Kılavuzu (15 sayfalar), Kurulum Talimatları Kılavuzu (14 sayfalar)

Garmin GPSMAP 8000 Series Kullanıcı El Kitabı
collision alarms that result from AIS vessel targeting and
tracking, and the display of information about AIS vessels.

Chart and 3D Chart View Settings

NOTE: Not all settings apply to all charts and 3D chart views.
Some options require premium maps or connected accessories,
such as radar.
These settings apply to the charts and 3D chart views,
except the radar overlay and Fish Eye 3D (Fish Eye 3D
Settings).
From a chart or a 3D chart view, select Menu.
Waypoints and Tracks: See Waypoints and Tracks Settings on
the Charts and Chart Views.
Other Vessels: See Other Vessels Settings on the Charts and
Chart Views.
Surface Radar: Shows surface radar details on the Perspective
3D or Mariner's Eye 3D chart views.
Weather Radar: Shows weather radar imaging on
the Perspective 3D or Mariner's Eye 3D chart views.
Navaids: Shows navigational aids on the Fishing chart.
Laylines: Adjusts the laylines, when in sailing mode (Laylines
Settings).
Chart Setup: See Navigation and Fishing Chart Setup.
Chart Appearance: See Chart Appearance Settings. This might
appear in the Chart Setup menu.

Navigation and Fishing Chart Setup

NOTE: Not all settings apply to all charts and 3D chart
views. Some settings require external accessories or
applicable premium charts.
From the Navigation chart or Fishing chart, select Menu >
Chart Setup.
Satellite Photos: Shows high-resolution satellite images on the
land or on both land and sea portions of the Navigation
chart, when certain premium maps are used Showing
Satellite Imagery on the Navigation Chart.
Water Overlay: Enables relief shading, which shows the
gradient of the bottom with shading, or sonar imagery,
which helps identify the density of the bottom. This feature
is available only with some premium maps.
Tides & Currents: Shows current station indicators and tide
station indicators on the chart Showing Tides and Current
Indicators and enables the tides and current slider, which
sets the time for which tides and currents are reported on
the map.
Roses: Shows a compass rose around your boat, indicating
compass direction oriented to the heading of the boat. A
true wind direction or apparent wind direction indicator
appears if the chartplotter is connected to a compatible
marine wind sensor. When in sailing mode, true and
apparent wind are shown on the wind rose.
Lake Level: Sets the present water level of the lake.
This feature is available only with some premium maps.
Inset Map: Shows a small map centered on your present
location.
Weather: Sets which weather items are shown on the chart,
when the chartplotter is connected to a compatible weather
receiver
with
an
active
compatible, connected antenna and an active subscription.
Chart Appearance: See Chart Appearance Settings.
Waypoints and Tracks Settings on the Charts and
Chart Views
From a chart or a 3D chart view, select Menu > Waypoints and
Tracks.
Tracks: Shows tracks on the chart or 3D chart view.
Charts and 3D Chart Views
subscription.
Requires
Waypoints: Shows the list of waypoints (Viewing a List of all
Waypoints).
Create Waypoint: Creates a new waypoint.
Waypoint Display: Sets how to display waypoints on the chart.
Active Tracks: Shows the active track options menu.
Saved Tracks: Shows the list of saved tracks (Viewing a List of
Saved Tracks).
Tracks Display: Sets which tracks to display on the chart based
on track color.

Chart Appearance Settings

You can adjust the appearance of the different charts and 3D
chart views. Each setting is specific to the chart or chart view
being used.
NOTE: Not all settings apply to all charts and 3D chart views
and chartplotter models. Some options require premium maps or
connected accessories.
From a chart or 3D chart view, select Menu > Chart Setup >
Chart Appearance.
Orientation: Sets the perspective of the map.
Detail: Adjusts the amount of detail shown on the map, at
different zoom levels.
Heading Line: Shows and adjusts the heading line, which is a
line drawn on the map from the bow of the boat in the
direction of travel, and sets the data source for the heading
line.
World Map: Uses either a basic world map or a shaded relief
map on the chart. These differences are visible only when
zoomed out too far to see the detailed charts.
Spot Depths: Turns on spot soundings and sets a dangerous
depth. Spot depths that are equal to or more shallow than the
dangerous depth are indicated by red text.
Safety Shading: Sets the shades from the shoreline to the
specified depth.
Depth Range Shading: Specifies an upper and lower depth to
shade between.
Symbols: Shows and configures the appearance of various
symbols on the chart, such as the vessel icon, navaid
symbols, land POIs, and light sectors.
Inset Map: Shows a map zoomed in on the vessel's location in
the corner of the main map.
Style: Sets how the chart appears over 3D terrain.
Hazard Colors: Shows shallow water and land with a color
scale. Blue indicates deep water, yellow is shallow water, and
red is very shallow water.
Safe Depth: Sets the appearance of a safe depth for the
Mariner's Eye 3D chart view.
NOTE: This setting affects only the appearance of hazard
colors for the Mariner's Eye 3D chart view. It does not affect
the safe water depth Auto Guidance setting or the sonar
shallow water alarm setting.
Range Rings: Shows and configures the appearance of range
rings, which help you to visualize distances in some chart
views.
Lane Width: Specifies the width of the navigation lane, which is
the magenta line in some chart views that indicates the
a
course to your destination.
Other Vessels Settings on the Charts and Chart Views
NOTE: These options require connected accessories, such as
an AIS receiver or VHF radio.
From a chart or a 3D chart view, select Menu > Other Vessels.
List: Shows a list of AIS and MARPA vessels.
DSC: Shows the DSC list and sets the DSC trails on the chart.
7