Brother MFC-J432W Kullanıcı Kılavuzu - Sayfa 10
Hepsi Bir Arada Yazıcı Brother MFC-J432W için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother MFC-J432W 40 sayfaları.
Ayrıca Brother MFC-J432W için: Hızlı Başlangıç Kılavuzu (37 sayfalar)
Sayfayı Yazdır
3
Sending a fax
Additional sending
options
Sending faxes using multiple
settings
When you send a fax you can choose a
combination of settings, such as
Fax Resolution, Contrast,
Glass ScanSize, and Real Time TX.
You can also choose: Outgoing Call,
Caller ID hist., Overseas Mode,
Speed Dial, Broadcasting,
Set New Default, and Factory Reset.
Some settings are only available when
sending mono faxes.
a
Press
(FAX).
The LCD shows:
b
Press a or b to choose the setting you
want to change.
Press OK.
c
Press a or b to choose an option.
Press OK.
d
Go back to b to change more settings.
6
Note
• Most settings are temporary and the
3
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as the
3
default. These settings will remain until
you change them again. (See Setting your
changes as a new default uu page 7.)
Stop faxing
To stop faxing, press Stop/Exit.
Contrast
If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Choose Light when sending a light
document. Choose Dark when sending a
dark document.
a
Press
b
Press a or b to choose Contrast.
Press OK.
c
Press a or b to choose Auto, Light or
Dark.
Press OK.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a colour fax.
• When you choose Photo as the Fax
Resolution.
(FAX).
3
3
3