Brother MFC-J432W Kullanıcı Kılavuzu - Sayfa 12
Hepsi Bir Arada Yazıcı Brother MFC-J432W için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother MFC-J432W 40 sayfaları.
Ayrıca Brother MFC-J432W için: Hızlı Başlangıç Kılavuzu (37 sayfalar)
Sayfayı Yazdır
Chapter 3
Additional sending
operations
Sending a fax manually
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
Note
To send a multiple page fax, use the ADF.
a
Press
(FAX).
b
Load your document.
c
To listen for a dial tone, press Hook.
d
Dial the fax number.
e
When you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass,
press 1 to send the fax.
8
Sending a fax at the end of a
conversation
3
At the end of a conversation, you can send a
fax to the other party before you both hang
3
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Press
c
Load your document.
d
Press Mono Start or Colour Start.
If you are using the scanner glass,
press 1 to send a fax.
e
Replace the handset of the external
phone.
Dual Access
(Monochrome only)
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
(FAX).
3
3