Brother MFC-J5845DW Referans Kılavuzu - Sayfa 25

Hepsi Bir Arada Yazıcı Brother MFC-J5845DW için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Brother MFC-J5845DW 32 sayfaları. Brief explanations for routine operations
Ayrıca Brother MFC-J5845DW için: Hızlı Kurulum Kılavuzu (2 sayfalar), Ürün Güvenlik Kılavuzu (25 sayfalar), Ürün Güvenlik Kılavuzu (25 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Error Message

Jam Front/Rear

Jam Front

Jam Rear

Jam MP Tray

Jam Front/MP Tray

Jam Tray2

Repeat Jam XX

Low Temperature

Media is Full.

No Caller ID

No Paper Fed

Action

Remove the jammed paper.

For more detailed information, see the Online User's Guide: Printer

Jam or Paper Jam.

If there is a repeat paper jam, try another paper jam clear operation.

For more detailed information, see the Online User's Guide: Remove

Paper Scraps.

Make sure the paper guides are set to the correct paper size.

Make sure the paper support is fully inserted into the machine.

For more detailed information, see the Online User's Guide: Paper is

Jammed in the Front of the Machine.

Clean the paper pick-up rollers.

For more detailed information, see the Online User's Guide: Clean the

Paper Pick-up Rollers.

After warming the room, allow the machine to warm up to room

temperature. Try again when the machine has warmed up.

Your machine can only save to your USB flash drive if it contains fewer

than 999 files. Delete unused files and try again.

Delete unused files from your USB flash drive to make some free

space, and then try again.

There is no incoming call history. You did not receive calls or you have

not subscribed to the Caller ID service from your telephone company.

To use the Caller ID feature, call your telephone company.

For more detailed information, see the Online User's Guide: Caller ID.

Do one of the following:

• Refill the paper tray, and then follow the LCD instructions.

• Remove and reload the paper, and then follow the LCD instructions.

The paper was not inserted in the center position of the MP tray.

Remove the paper and reinsert it in the center of the MP tray, and then

follow the LCD instructions.

For more detailed information, see the Online User's Guide: Load

Paper in the Multi-purpose Tray (MP Tray).

The Jam Clear Cover is not closed correctly.

Paper dust has accumulated on the surface of the paper pick-up

rollers.

Clean the paper pick-up rollers.

For more detailed information, see the Online User's Guide: Clean the

Paper Pick-up Rollers.