Brother MFC-J5845DW Referans Kılavuzu - Sayfa 27

Hepsi Bir Arada Yazıcı Brother MFC-J5845DW için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Brother MFC-J5845DW 32 sayfaları. Brief explanations for routine operations
Ayrıca Brother MFC-J5845DW için: Hızlı Kurulum Kılavuzu (2 sayfalar), Ürün Güvenlik Kılavuzu (25 sayfalar), Ürün Güvenlik Kılavuzu (25 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Error Message

Paper Tray #1 not

detected

Paper Tray #2 not

detected

Repetitive No

Paper Fed

Repetitive Paper

Jams

Replace Ink

Touchscreen

Initialization

Failed

Tray #1 Settings

Tray #2 Settings

MP Tray Settings

Action

Slowly push the paper tray completely into the machine.

Paper or a foreign object has prevented the paper tray from being

inserted correctly.

Pull the paper tray out of the machine, and remove the jammed paper

or foreign object. If you cannot find or remove the jammed paper, see

the Online User's Guide: Printer Jam or Paper Jam.

Clean the paper pick-up rollers.

For more detailed information, see the Online User's Guide: Clean the

Paper Pick-up Rollers.

Remove any foreign objects and paper scraps in the machine.

For more detailed information, see the Online User's Guide: Remove

Paper Scraps.

One or more of the ink cartridges have reached the end of their lives.

Replace the ink cartridges.

For more detailed information, see the Online User's Guide: Replace

the Ink Cartridges.

• You can still scan even if the ink is low or needs to be

replaced.

The touchscreen was pressed before the power on initialization was

completed.

Make sure nothing is touching or resting on the touchscreen,

especially when plugging the machine in.

Debris may be stuck between the lower part of the touchscreen and its

frame.

Insert a piece of stiff paper between the lower part of the touchscreen

and its frame and slide it back and forth to push out the debris.

This message is displayed when the setting to confirm the paper type

and size is enabled.

To not display this confirmation message, change the setting to Off.

For more detailed information, see the Online User's Guide: Change

the Check Paper Size Setting.