Brother MFC-J825DW Hızlı Kurulum Kılavuzu - Sayfa 22

Hepsi Bir Arada Yazıcı Brother MFC-J825DW için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother MFC-J825DW 42 sayfaları. Quick setup guide - spanish
Ayrıca Brother MFC-J825DW için: Manuel (12 sayfalar), Manuel (21 sayfalar), Ürün Güvenlik Kılavuzu (17 sayfalar), Web Connect Kılavuzu (22 sayfalar), Hızlı Kurulum Kılavuzu (45 sayfalar), Güvenlik Kılavuzu (17 sayfalar), Sorun Giderme Kılavuzu (6 sayfalar), (İspanyolca) El Kitabı (21 sayfalar), (İspanyolca) El Kitabı (16 sayfalar), (İngilizce) Hızlı Yapılandırma Kılavuzu (44 sayfalar)

Wired Network

For wired network interface users

Before you install

Make sure your machine is connected to the power

and your Macintosh is ON. You must be logged on

with Administrator rights.

Note

• For Mac OS X 10.4.0 to 10.4.10 users, upgrade

to Mac OS X 10.4.11 - 10.6.x.

• If you have previously set up your machine for

a wireless network and then want to set it up on

a wired network, you should check that the

machine's Network I/F is set to

Wired LAN. The wireless network interface

will become inactive with this setting.

On your machine, press Menu.

Press Network.

Press Network I/F.

Press Wired LAN.

Press Stop/Exit.

Connect the network

cable

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

(Mac OS X 10.4.11, 10.5.x, 10.6.x)

You will find the Ethernet port marked with a

symbol inside the machine on the left as

shown below. Remove the protective cap and

connect the network cable to the Ethernet port.

Carefully guide the network cable into the cable

channel and out the back of the machine.

Connect the cable to your network.

IMPORTANT

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Note

If both the USB and the LAN cables are being

used, guide both cables through the cable

channel with one on top of the other.

Macintosh

USB