Brother DCP-J1100DW Referans Kılavuzu - Sayfa 13

Yazıcı Brother DCP-J1100DW için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Brother DCP-J1100DW 31 sayfaları.
Ayrıca Brother DCP-J1100DW için: Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Ürün Güvenlik Kılavuzu (18 sayfalar), Referans Kılavuzu (31 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır
Brother DCP-J1100DW Referans Kılavuzu
5
Scan

Before Scanning

Before attempting to scan, confirm the
following:
• Make sure you have installed the Brother
software and drivers.
• Make sure the USB or network cable is
connected correctly, or that you are
connected to the network using your
wireless access point/router.
Scan from Your
Computer
There are several ways you can use your
computer to scan photos and documents on
your Brother machine. Use the software
applications provided by Brother, or use your
favourite scanning application.
For more detailed information, see the Online
User's Guide: Scan from Your Computer
®
(Windows
) or Scan from Your Computer
(Mac).
Scan Using the Scan
Button on the Machine
1
Load your document.
2
Press [Scan] > [to PC] > [to
File].
3
If the machine is connected over the
network, press a or b to display the
computer where you want to send data,
and then press the computer name.
If the LCD prompts you to enter a PIN,
use the LCD to enter the four-digit PIN for
the computer, and then press [OK].
4
Do one of the following:
• To change the settings, press
[Options] or [Set at Device],
and then go to the next step.
• Press [Start] to start scanning
without changing additional settings.
The machine starts scanning. If using
the machine's scanner glass, follow
the LCD instructions to complete the
scanning job.
To use the [Options] or [Set at
Device] settings, a computer with
ControlCenter4 (Windows
iPrint&Scan (Mac) installed must be
connected to the machine.
5
Change the scan settings you want to
change, such as scan type, resolution,
file type and document size, if needed.
When finished press [OK].
6
Press [Start].
The machine starts scanning. If using
the machine's scanner glass, follow the
LCD instructions to complete the
scanning job.
®
) or Brother
12