Brother DCP-J1100DW Referans Kılavuzu - Sayfa 15
Yazıcı Brother DCP-J1100DW için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Brother DCP-J1100DW 31 sayfaları.
Ayrıca Brother DCP-J1100DW için: Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Ürün Güvenlik Kılavuzu (18 sayfalar), Referans Kılavuzu (31 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
7
Fax
Before Faxing
Telephone Line Interference/
VoIP
Related Models:
MFC-J1300DW
If you are having problems sending or
receiving a fax due to possible interference on
the telephone line or if you are using a VoIP
system, we recommend changing the modem
speed to minimise errors in fax operations.
1
Press
[Settings] > [All
Settings] > [Initial Setup] >
[Compatibility].
2
Press the option you want.
• [Basic(for VoIP)] reduces the
modem speed to 9,600 bps and turns
off colour fax receiving and Error
Correction Mode (ECM), except for
colour fax-sending. Unless
interference is a recurring problem on
your telephone line, you may prefer
to use it only when needed.
To improve compatibility with most
VoIP services, Brother recommends
changing the compatibility setting to
[Basic(for VoIP)].
• [Normal] sets the modem speed at
14,400 bps.
3
Press
.
• VoIP (Voice over IP) is a type of phone
system that uses an Internet
connection, rather than a traditional
phone line.
• Brother does not recommend the use
of a VoIP line. VoIP limitations in
general can cause some functions of
the fax machine not to work correctly.
Send a Fax
Related Models:
MFC-J1300DW
1
Load your document in the ADF or place
it on the scanner glass.
2
Press
[Fax].
If [Fax Preview] is set to [On], press
[Fax] > [Sending Faxes].
The touchscreen displays:
3
Enter the fax number in one of the
following ways:
• Dial Pad (Enter the fax number
manually.)
Press all digits of the number using
the touchscreen.
14