AEG EPB331020M Kullanıcı Kılavuzu - Sayfa 11
Hob AEG EPB331020M için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG EPB331020M 36 sayfaları.
Ayrıca AEG EPB331020M için: Kullanıcı Kılavuzu (40 sayfalar), Kullanıcı Kılavuzu (40 sayfalar)
Sayfayı Yazdır
3. Press
or
to set the current
minutes.
4. Press
to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day
flashes in the display.
7.3 Setting the DURATION
function
1. Set a heating function.
2. Press
again and again until
starts to flash.
3. Press
or
to set the minutes and
then the hours. Press
When the set Duration time ends the
signal sounds for 2 minutes.
setting flash in the display. The oven
turns off automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knobs to the off position.
7.4 Setting the END function
1. Set a heating function.
2. Press
again and again until
starts to flash.
3. Press
or
to set the hours and
then the minutes. Press
confirm.
At the set End time the signal sounds for
2 minutes.
and time setting flash in
the display. The oven turns off
automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knobs to the off position.
7.5 Setting the TIME DELAY
function
1. Set a heating function.
2. Press
again and again until
starts to flash.
3. Press
The display shows flashing
4. Press
Oven turns on automatically later on,
works for the set DURATION time and
stops at the set END time.
At the set END time the signal sounds
for 2 minutes.
in the display. The oven turns off.
5. Press any button or open the oven
6. Turn the knobs to the off position.
to confirm.
7.6 Setting the MINUTE
MINDER
and time
Minute minder can be both set when the
oven is turned on and off.
1. Press
2. Press
3. Set the hours.
4. The MINUTE MINDER starts
to
5. When the set time ends the signal
7.7 COUNT UP TIMER
To reset the Count Up Timer, press and
hold
up again.
or
to set the minutes and
then the hours for DURATION time.
Press
to confirm.
or
to set the hours and
then the minutes for END time. Press
to confirm. The display shows
and the set temperature.
and time setting flash
door to stop the signal.
again and again until
starts to flash.
or
to set the seconds
and than the minutes.
When the time you set is longer than
60 minutes,
flash in the display.
automatically after 5 seconds.
After 90% of the set time the signal
sounds.
sounds for 2 minutes. "00:00" and
flash in the display. Press any
button to stop the signal.
and
. The timer starts to count
ENGLISH
11
.