Brother TD-4420TN Kullanıcı Kılavuzu - Sayfa 34

Yazıcı Brother TD-4420TN için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother TD-4420TN 44 sayfaları. Cutter module
Ayrıca Brother TD-4420TN için: Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır

1. Troubleshooting

Dump mode



The printer will enter dump mode after printing the printer configuration. This mode allows users

to verify and debug the printer's programs. The characters in the left column are received from

the printer's system and those in the right column are their hexadecimal representation.

ASCII data

Note

Dump mode



To resume

normal printing, turn the printer off and then on again.



4.3.3 Printer Initialization

Printer initialization clears the printer's DRAM and restores its factory settings.

To activate printer initialization:

1. Turn off the printer.

2. Press and hold the Feed/Pause Button, and then turn on the printer.

3. Release the button after the amber LED flashes five times and the LED is lit in green.

Note

The LED color will change as follows:

Amber  red (5 times)  amber (5 times)  green (5 times)  green/amber (5 times) 

red/amber (5 times)  green (lit)

requires 4" (101.5 mm) wide paper.

Hexadecimal representation of

the ASCII data