Brother TD-4420TN 사용자 설명서 - 페이지 34

{카테고리_이름} Brother TD-4420TN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother TD-4420TN 44 페이지. Cutter module
Brother TD-4420TN에 대해서도 마찬가지입니다: 설치 매뉴얼 (2 페이지)

페이지 인쇄

1. Troubleshooting

Dump mode



The printer will enter dump mode after printing the printer configuration. This mode allows users

to verify and debug the printer's programs. The characters in the left column are received from

the printer's system and those in the right column are their hexadecimal representation.

ASCII data

Note

Dump mode



To resume

normal printing, turn the printer off and then on again.



4.3.3 Printer Initialization

Printer initialization clears the printer's DRAM and restores its factory settings.

To activate printer initialization:

1. Turn off the printer.

2. Press and hold the Feed/Pause Button, and then turn on the printer.

3. Release the button after the amber LED flashes five times and the LED is lit in green.

Note

The LED color will change as follows:

Amber  red (5 times)  amber (5 times)  green (5 times)  green/amber (5 times) 

red/amber (5 times)  green (lit)

requires 4" (101.5 mm) wide paper.

Hexadecimal representation of

the ASCII data