Brother P-touch H500 Hızlı Kurulum Kılavuzu - Sayfa 25

Etiket makinesi Brother P-touch H500 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother P-touch H500 36 sayfaları.

Tape cassettes of 3.5mm, 6mm, 9mm, 12mm, 18mm or 24mm width can be used in your

P-touch. Use Brother tape cassettes with the

If the new tape cassette has a cardboard stopper, be sure to

remove the stopper before inserting the cassette.

Check that the end of the tape is not bent and that it passes

through the tape guide. If the tape is not passed through,

pass it through the tape guide referring to the illustration.

1. End of tape

2. Tape guide

After making sure that the power is off, open the rear cover. If

there is already a tape cassette in the P-touch, remove it by

pulling it straight up.

Insert the tape cassette into the tape

compartment, with the end of the tape facing the

P-touch tape exit slot, and press firmly until you

hear a click.

1. Tape exit slot

• When inserting the tape cassette, make sure that the tape and ink ribbon do not

catch on the print head.

• Make sure that there is no slack in the tape,

and then carefully insert the tape cassette.

If there is slack in the tape, the tape will

catch on the protrusion (2) when the

cassette is inserted and become bent or

wrinkled, causing the tape to jam.

To fix the slack in the tape, pull the tape

through the tape guide referring to the

illustration in the step 1.

Inserting a Tape Cassette

mark.

Inserting a Tape Cassette