Brother P-touch H500 Hızlı Kurulum Kılavuzu - Sayfa 27

Etiket makinesi Brother P-touch H500 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother P-touch H500 36 sayfaları.

Sayfayı Yazdır

Brother P-touch H500 Hızlı Kurulum Kılavuzu

Attribute

AC Adapter

• If you connect the AC adapter to the P-touch after you specified "Auto Power Off",

the setting for "AC Adapter" becomes valid.

• If you disconnect the AC adapter from the P-touch after you specified "Auto Power Off":

• When alkaline batteries are used, the auto power-off time is fixed to 20 minutes.

• When the Li-ion battery is used, the power turns Off immediately.

• The default value is "1hr." for the AC Adapter and "30min." for the Li-ion battery.

• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the

tape cassette.

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink

ribbon to be discharged with the tape. The tape may no longer be functional

after the ink ribbon discharges.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will

cause the tape to jam.

Feed & Cut

The Feed & Cut function feeds 24.5mm of blank tape, and then cuts the tape.

Press the Feed & Cut key.

"Feed & Cut?" will appear on the LCD display.

Using the

key. The message "Feeding Tape... Please Wait" appears while the tape is fed, and

then the tape is cut.

To exit or cancel this function press Esc.



Auto Power-Off Time

Value

Off

10min.

20min.

30min.

40min.

50min.

1hr.

2hr.

4hr.

8hr.

12hr.

Feeding Tape

key to select the "Feed & Cut", and then press either OK or Enter

