Fujitsu PRIMERGY 10/40GbE Kullanıcı Kılavuzu - Sayfa 8

Sunucu Fujitsu PRIMERGY 10/40GbE için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu PRIMERGY 10/40GbE 23 sayfaları. Connection blade 18/8+2

Sayfayı Yazdır

In case of BX400 chassis

Step4: Enter "cd△ConsoleRedirection" ('△' means space in this document)

Fujitsu (TM) Management Blade

Version 6.XX

</OemFujitsuSiemens> BX400S1 ->cd△ConsoleRedirection

status = 0

status_tag = COMMAND COMPLETED

</OemFujitsuSiemens/ConsoleRedirection> BX400S1 ->

Step5: Enter "set△ConsoleRedirectionTo=CBX"(X is connection blade number=1,2,3,4). Then, we can access

Connection Blade's CLI

</OemFujitsuSiemens/ConsoleRedirection> BX400S1 -> set△ConsoleRedirectionTo=CB1

Press <Ctrl+Q> Return Console Menu

2.4 Configuring Connection Blade with connection blade CLI

This section explains how to configure basic settings like IP address, default gateway and password.

Step1:

Password:

<WARNING> weak admin's password: contain at least 8 characters

Configure IP address by the following command.

Step2:

# configure

##oob(In case of setting IP address to out-of-band port)

(config)#oob△ip△address△192.168.1.10/24△3

(config)#oob△ip△route△0△default△192.168.1.1

(config)#exit

#show△oob

#show△ip△route

##lan0(In case of setting IP address to In-band port)

(config)#lan△vlan△10

(config)#lan△ip△address△192.168.1.10/24△3

(config)#lan△ip△route△0△default△192.168.1.1

(config)#exit

#show△interface

#show△ip△route

Configure login password

Step3:

# configure

(config)#password△admin△set△**************

PRIMERGY 10/40GbE Connection Blade 18/8+2 User Guide

#configure ip address to oob

#configure default gateway of oob

#show oob ip address information

#show default gateway information

#set vlan 10 as management vlan

#set ip address to lan 0

#set default gateway of lan 0

#show lan0 ip address information

#show default gateway information

Page 8 / 23