Fujitsu PRIMERGY 10/40GbE User Manual - Page 8

Browse online or download pdf User Manual for Server Fujitsu PRIMERGY 10/40GbE. Fujitsu PRIMERGY 10/40GbE 23 pages. Connection blade 18/8+2

Print Page
In case of BX400 chassis
Step4: Enter "cd△ConsoleRedirection" ('△' means space in this document)
Fujitsu (TM) Management Blade
Version 6.XX
Copyright 2009 Fujitsu, Inc. All rights reserved.
</OemFujitsuSiemens> BX400S1 ->cd△ConsoleRedirection
status = 0
status_tag = COMMAND COMPLETED
</OemFujitsuSiemens/ConsoleRedirection> BX400S1 ->
Step5: Enter "set△ConsoleRedirectionTo=CBX"(X is connection blade number=1,2,3,4). Then, we can access
Connection Blade's CLI
</OemFujitsuSiemens/ConsoleRedirection> BX400S1 -> set△ConsoleRedirectionTo=CB1
Press <Ctrl+Q> Return Console Menu

2.4 Configuring Connection Blade with connection blade CLI

This section explains how to configure basic settings like IP address, default gateway and password.
Login CLI by entering username and password (username:admin, password:admin by default)
Step1:
Login: admin
Password:
<WARNING> weak admin's password: contain at least 8 characters
#
Configure IP address by the following command.
Step2:
# configure
##oob(In case of setting IP address to out-of-band port)
(config)#oob△ip△address△192.168.1.10/24△3
(config)#oob△ip△route△0△default△192.168.1.1
(config)#exit
#show△oob
#show△ip△route
##lan0(In case of setting IP address to In-band port)
(config)#lan△vlan△10
(config)#lan△ip△address△192.168.1.10/24△3
(config)#lan△ip△route△0△default△192.168.1.1
(config)#exit
#show△interface
#show△ip△route
Configure login password
Step3:
# configure
(config)#password△admin△set△**************
PRIMERGY 10/40GbE Connection Blade 18/8+2 User Guide
#configure ip address to oob
#configure default gateway of oob
#show oob ip address information
#show default gateway information
#set vlan 10 as management vlan
#set ip address to lan 0
#set default gateway of lan 0
#show lan0 ip address information
#show default gateway information
Page 8 / 23