Fujitsu FI-5530C2 Başlangıç Kılavuzu - Sayfa 20

Tarayıcı Fujitsu FI-5530C2 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Fujitsu FI-5530C2 27 sayfaları. Image scanner
Ayrıca Fujitsu FI-5530C2 için: Başlarken (28 sayfalar), Kurulum Prosedürleri Kılavuzu (6 sayfalar), Teknik Özellikler (2 sayfalar), Başlangıç Kılavuzu (11 sayfalar), Temizlik Talimatları (2 sayfalar), Temizlik Talimatları (2 sayfalar), Başlarken (11 sayfalar)

Sayfayı Yazdır
Fujitsu FI-5530C2 Başlangıç Kılavuzu
9. In the [Scan Settings] dialog box, clear the
[Save to file] checkbox.
You only check the operation now, so you
HINT
do not have to save to file.
10. Click [Scanner Settings].
⇒
A setup dialog box appears for you to config-
ure scanner driver settings.
11. Configure scanner settings such as the resolu-
tion and paper size.
To use FUJITSU TWAIN 32
On the dialog box below, configure scan settings,
and then click the [OK] button.
12
To use FUJITSU ISIS
On the dialog box below, configure scanning set-
tings, and then click the [OK] button.
⇒
You are returned to the [Scan Settings] dialog
box.
12. Click the [Scan] button.
When you are using FUJITSU TWAIN 32,
HINT
you may see the TWAIN Driver setup dia-
log box again. If so, click the [Scan] button
on the dialog box.
⇒
The document is scanned and the scanned
image is displayed in the [ScandAll PRO]
window.
If the scanned document image is displayed in the win-
dow, it means that the scanner driver is installed prop-
erly.
For further information about how to scan documents,
refer to "fi-5530C2 Operator's Guide" contained in the
Setup CD-ROM.