Fujitsu M3096GX Sarf Malzemesi Değiştirme ve Temizleme Talimatları - Sayfa 6

Tarayıcı Fujitsu M3096GX için çevrimiçi göz atın veya pdf Sarf Malzemesi Değiştirme ve Temizleme Talimatları indirin. Fujitsu M3096GX 12 sayfaları. Departmental document scanners
Ayrıca Fujitsu M3096GX için: Kurulum Prosedürleri Kılavuzu (7 sayfalar), Kurulum Prosedürleri Kılavuzu (9 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar)

Fujitsu M3096GX Sarf Malzemesi Değiştirme ve Temizleme Talimatları
M3096EX/GX C
onsuMablE
R
C
EplaCEMEnt and
lEaninG
R
p
eplaCinG the
Misfeeds can be caused by a worn Pick Roller. The life span of the Pick
Rollers is about 200,000 sheets or 1 year if maintained properly. If NCR
or carbonless paper is used the life span may be decreased by half.
Lift the ADF Lever and
open the ADF.
Remove the two thumb
screws and lift the Pick
Roller Cover out of the
ADF.
Compress the ends of
the retaining hook and
remove from the groove
in the shaft.
Slide the retaining hook
and Bushing A toward
the sponge roller.
Slide the roller shaft
towards the center of
the scanner (direction of
Arrow A) to remove the
roller shaft from the rear
ADF frame.
Now slide toward the
back of the scanner
(direction of Arrow B) to
remove the Pick Roller
Shaft from the ADF.
Remove the bushings and the retaining hook from the roller shaft.
Retaining Hook
Bushing
i
nstRuCtions
R
iCK
olleR
Thumb
Screw
Bushing
Thumb
Screw
Pick Roller
Cover
Bushing A
Retaining Hook
A
B
Bushing