Fujitsu S510M - ScanSnap - Document Scanner Başlangıç Kılavuzu - Sayfa 21

Tarayıcı Fujitsu S510M - ScanSnap - Document Scanner için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Fujitsu S510M - ScanSnap - Document Scanner 24 sayfaları. Color image scanner
Ayrıca Fujitsu S510M - ScanSnap - Document Scanner için: Kurulum Prosedürleri (3 sayfalar), Teknik Özellikler (2 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Başlangıç Kılavuzu (35 sayfalar), Temizlik Talimatları (2 sayfalar), Temizlik Talimatları (2 sayfalar)

Make sure that the Pad ASSY is firmly

ATTENTION

secured. If it is not secured, documents will

jam or other feeding errors may occur.

5. Close the ADF

ADF

Gently push the ADF until you hear it click when

returning it to its original position.

6. Turn on the scanner.

The ScanSnap Manager icon changes from the

inactive state

7. Click and hold down the mouse button on the

ScanSnap Manager icon

select [Check consumable supplies] from the menu.

8. In the "Check consumable status" window, click the

[Reset] button of the consumable you replaced.

A confirmation pop-up screen appears.

If you click the [Yes] button, the counter is reset to

"0."

to the active state

in the Dock menu, and

6.3. Replacing the Pick Roller

Replace the Pick roller following the procedures below.

1. Remove the document on the Paper chute if any.

2. Pull the Cover open lever and open the ADF.

Paper chute

ADF

Cover open lever

3. Adjust the Side Guide to the "A5" size.

4. Pinch the handle on the Sheet guide to remove it.

5. Rotate the Pick roller bushing (Left) in the direction of

the arrow.

Pick roller

Pick roller bushing

ScanSnap S510M for Mac Getting Started | 19

Sheet guide

Handle

Claw

Pick roller shaft