Fujitsu S510M - ScanSnap - Document Scanner 시작하기 매뉴얼 - 페이지 21
{카테고리_이름} Fujitsu S510M - ScanSnap - Document Scanner에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu S510M - ScanSnap - Document Scanner 24 페이지. Color image scanner
Fujitsu S510M - ScanSnap - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 (3 페이지), 사양 (2 페이지), 빠른 설치 매뉴얼 (2 페이지), 시작하기 매뉴얼 (35 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)
페이지 인쇄
Make sure that the Pad ASSY is firmly
ATTENTION
secured. If it is not secured, documents will
jam or other feeding errors may occur.
5. Close the ADF
ADF
Gently push the ADF until you hear it click when
returning it to its original position.
6. Turn on the scanner.
The ScanSnap Manager icon changes from the
inactive state
7. Click and hold down the mouse button on the
ScanSnap Manager icon
select [Check consumable supplies] from the menu.
8. In the "Check consumable status" window, click the
[Reset] button of the consumable you replaced.
A confirmation pop-up screen appears.
If you click the [Yes] button, the counter is reset to
"0."
to the active state
.
in the Dock menu, and
6.3. Replacing the Pick Roller
Replace the Pick roller following the procedures below.
1. Remove the document on the Paper chute if any.
2. Pull the Cover open lever and open the ADF.
Paper chute
ADF
Cover open lever
3. Adjust the Side Guide to the "A5" size.
A5
4. Pinch the handle on the Sheet guide to remove it.
5. Rotate the Pick roller bushing (Left) in the direction of
the arrow.
Pick roller
Pick roller bushing
ScanSnap S510M for Mac Getting Started | 19
A5
Sheet guide
Handle
Claw
Pick roller shaft