Fujitsu S510M - ScanSnap - Document Scanner 시작하기 매뉴얼 - 페이지 20
{카테고리_이름} Fujitsu S510M - ScanSnap - Document Scanner에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu S510M - ScanSnap - Document Scanner 24 페이지. Color image scanner
Fujitsu S510M - ScanSnap - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 (3 페이지), 사양 (2 페이지), 빠른 설치 매뉴얼 (2 페이지), 시작하기 매뉴얼 (35 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)
페이지 인쇄
6. Consumables/Carrier Sheet
This chapter describes how to replace consumables.
WARNING
Fire/Electric Shock
Before you replace the consumables of this scanner,
unplug the AC adapter cord from the outlet to turn off
the scanner.
6.1. Part Numbers and a
Replacement Cycle of
Consumable
The table below shows the part numbers of the
consumables and rough guidelines on the replacement of
consumables.
No.
Description
1
Pad ASSY
PA03360-0002
2
Pick roller
PA03360-0001
Replacement cycles above are rough guidelines when
considering the use of A4/Letter wood-free paper 80 g/m
(21 lb). The actual cycle may vary depending on the types
of paper to be scanned. Use only the consumables
specified by PFU LIMITED.
To estimate the time when you have to replace the
HINT
consumables with new ones and to monitor the total
number of scanned pages, refer to the following:
1. Click and hold down the mouse button on the
ScanSnap Manager icon in the Dock menu.
2. Select [Check consumable supplies] from the
menu.
You will see the "Check consumable status"
window, which shows how many times
consumables have been used.
18 |
P/N
Replacement Cycle
50,000 scan or one
year
100,000 scans or
one year
Replace the consumables according to "Target to
change supplies" as a rough guideline.
For details about consumables and where you can
purchase them, visit the following website or contact
the store where you purchased your scanner.
Website:
6.2. Replacing the Pad ASSY
Replace the Pad ASSY following the procedures below.
1. Remove the documents on the Paper chute if any.
2. Pull the Cover open lever and open the ADF.
Paper chute
ADF
Cover open lever
2
3. Remove the Pad ASSY.
While holding the both sides of the Pad ASSY, pull out
the Pad ASSY in the direction of the arrow.
Pad ASSY
4. Install the new Pad ASSY.
Pad ASSY
http://scansnap.fujitsu.com/
ADF
ADF