Fujitsu SCANPARTNER 600C Kullanıcı Kılavuzu - Sayfa 13

Tarayıcı Fujitsu SCANPARTNER 600C için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu SCANPARTNER 600C 23 sayfaları. Image scanner
Ayrıca Fujitsu SCANPARTNER 600C için: Kullanıcı Kılavuzu (25 sayfalar), Sarf Malzemesi Değiştirme ve Temizleme Talimatları (7 sayfalar), Kurulum Prosedürleri (5 sayfalar)

2.7

Connecting the Cable

Turning the Power Off

The Power Switch is located on the right hand side of the Scanner.

Depress the side marked "O" to turn the power off.

ii)

Turning the Power On

Depress the side marked " " to turn the power on. The POWER LED will light. If not, please check

the power source.

iii)

Connecting the Power Cable and SCSI Signal Cables

Connect the power cable and SCSI signal cables as shown in Figure 2-8.

vi)

SCSI Termination

The Fujitsu ScanPartner 600C comes complete with a built in SCSI terminator. If the Scanner is the

last device in a SCSI chain the terminator should be switched on. If the Scanner is not the last device

the terminator should be switched off. The terminator on/off switch is located on the back of the

Scanner, to the left of the SCSI cable connectors.

HOST

TERM.

HOST

SCANNER

(TERMINATOR OFF)

SCANNER

(TERMINATOR ON)

SCSI DEVICE

TERM.