Fujitsu SCANPARTNER 600C 사용자 설명서 - 페이지 13
{카테고리_이름} Fujitsu SCANPARTNER 600C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SCANPARTNER 600C 23 페이지. Image scanner
Fujitsu SCANPARTNER 600C에 대해서도 마찬가지입니다: 사용자 설명서 (25 페이지), 소모품 교체 및 청소 지침 (7 페이지), 설치 절차 (5 페이지)
페이지 인쇄
2.7
Connecting the Cable
i)
Turning the Power Off
The Power Switch is located on the right hand side of the Scanner.
Depress the side marked "O" to turn the power off.
ii)
Turning the Power On
Depress the side marked " " to turn the power on. The POWER LED will light. If not, please check
the power source.
iii)
Connecting the Power Cable and SCSI Signal Cables
Connect the power cable and SCSI signal cables as shown in Figure 2-8.
vi)
SCSI Termination
The Fujitsu ScanPartner 600C comes complete with a built in SCSI terminator. If the Scanner is the
last device in a SCSI chain the terminator should be switched on. If the Scanner is not the last device
the terminator should be switched off. The terminator on/off switch is located on the back of the
Scanner, to the left of the SCSI cable connectors.
HOST
TERM.
TERM.
PC
HOST
PC
SCANNER
(TERMINATOR OFF)
OR
SCANNER
(TERMINATOR ON)
13
SCSI DEVICE
TERM.