Fujitsu SCANPARTNER 600C 사용자 설명서 - 페이지 15

{카테고리_이름} Fujitsu SCANPARTNER 600C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SCANPARTNER 600C 23 페이지. Image scanner
Fujitsu SCANPARTNER 600C에 대해서도 마찬가지입니다: 사용자 설명서 (25 페이지), 소모품 교체 및 청소 지침 (7 페이지), 설치 절차 (5 페이지)

페이지 인쇄
Fujitsu SCANPARTNER 600C 사용자 설명서
3.

Maintenance

3.1

Cleaning the ADF

Your Scanner is designed to be maintenance free. However, it still needs to be cleaned occasionally to ensure
optimum image quality and performance.
From time to time the pad assembly and feeding rollers may become contaminated with ink, toner particles or
paper dust. In this case the scanner may not feed documents smoothly or several documents may feed at once.
If this occurs please follow the cleaning procedures to return your Scanner to its original state.
The cleaning procedures (Figure 3-1):
i)
Moisten a cotton swab with isoprophyl alcohol (95%). (Cleaner kits are available from Fujitsu).
ii)
Open the ADF unit by depressing the button
the left
with your finger and repeat the above cleaning procedures until the rollers are clean. Be careful not to
snag or damage the pick springs.
iii)
Wipe the pad in the direction from top to bottom. Be careful not to hook the pick springs.
iv)
Close the ADF unit. Your Scanner is now ready for use.
‚
. Wipe the feeding rollers by moving the swab from side to side. Rotate the rollers forward
•
in front of the ADF unit, carefully open the ADF to
15