Chapter 4
As well as operating via the LCD touch panel, the
administrator can configure scanner settings via the net-
work interface. In order to do this, the Admin Tool, or
Central Admin Console, must first be installed on a
computer connected to the network.
The Admin Tool can set one scanner at a time. The Cen-
tral Admin Console can set multiple scanners at a time.
For more details about the Central Admin Console, refer
to the "Operator's Guide".
This chapter provides a description of the Admin Tool.
The information and procedure for installing the Admin
Tool are as follows.
Software (English versions)
Operating system
Windows XP (Service Pack 3 or later)
Windows Vista (Service Pack 1 or later)
Windows 7
Windows 8
Windows Server 2003 (Service Pack 2 or later)
Windows Server 2008
Windows Server 2012
.NET Framework
Which .NET Framework is used differs depending on
the operating system.
Operating system
Windows XP
Windows Vista
Windows 7
Windows Server 2003
Windows Server 2008
Windows 8
Windows Server 2012
Web browser
Internet Explorer 6.0 (Service Pack 2 or
later) (*2)
Hardware
32 MB or more of free memory space
64 MB or more of free disk space
Any computer which runs the supported software
XGA monitor or better
LAN cable
Pointing device (e.g. mouse)
Installing the Admin Tool
.NET Framework (*1)
.NET Framework 2.0
(Service Pack 2 or later)
.NET Framework 3.0
(Service Pack 2 or later)
.NET Framework 3.5
(Service Pack 1 or later)
.NET Framework 4.5
*1: If .NET Framework is not installed, it will be notified.
Download .NET Framework from the Microsoft Web site
and install it into the computer.
When installing .NET Framework, check free disk space
in advance. For .NET Framework 2.0, approximately 500
MB of free disk space is required.
*2: Confirm that the latest security patch has been applied. If
the latest patch has not been applied, downloading
operations (such as manual download) may not be
possible. For Windows XP, "KB933566" must be applied
to Internet Explorer.
If download operations are not possible, clear the [Do not
save encrypted pages to disk] check box on [Advanced] of
[Internet Options] in Internet Explorer, and then try
downloading again.
If the Web browser is Internet Explorer 10, configure
[Compatibility View settings] so that the specified URL is
displayed in compatibility view
Make sure that the language settings
ATTENTION
for the computer where the Admin
Tool is installed are the same as the
language settings for the scanner.
1. Specify the scanner name as a URL in the
Web browser's location bar.
According to the settings from "3.6 Setting the
Admin Network" (page 9), the specified URL is
as follows:
SSL is [Off], no port number change
http://scanner_name or IP_address/
SSL is [Off], port number change
http://scanner_name or IP_address:port_number/
For port_number, number enter the changed port
number
SSL is [On], no port number change
https://scanner_name or IP_address/
SSL is [On], port number change
https://scanner_name or IP_address:port_number/
For port_number, enter the changed port number
For SSL, the "Security Alert" window is dis-
played when connecting. Press the [Yes] button
on the "Security Alert" window.
The "Login" screen appears.
12
Sayfayı Yazdır