Fujitsu ScanSnap S1300 Başlangıç Kılavuzu - Sayfa 3
Tarayıcı Fujitsu ScanSnap S1300 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Fujitsu ScanSnap S1300 9 sayfaları. Color image scanner
Ayrıca Fujitsu ScanSnap S1300 için: Broşür ve Teknik Özellikler (2 sayfalar), Başlangıç Kılavuzu (8 sayfalar), Teknik Özellikler (3 sayfalar), Güvenlik Önlemleri (9 sayfalar)
Sayfayı Yazdır
■ System Requirements
Windows
Windows Vista
Operating
Windows
system
Windows
®
Intel
Core™ 2 Duo 2.2 GHz or higher
CPU
recommended
(Minimum: Intel
®
Windows
32-bit: 1 GB or more
64-bit: 2 GB or more
Windows Vista
Memory
®
Windows
®
Windows
512 MB or more
(1 GB or more recommended)
Display
800 × 600 pixels or higher
resolution
2220 MB or more of free hard disk
space is required
Hard disk
(2670 MB or more of free hard disk
space (*3)
space is required for using with
Rack2-Filer)
USB port (*4) USB2.0/USB1.1
*1: Service Pack 2 or later is required
*2: Service Pack 4 or later is required
®
*3: For Windows Vista
, if .NET Framework 3.5 SP1 is not
installed, a maximum of 500 MB of additional free hard
disk space is required for it.
®
For Windows
XP, if .NET Framework 3.5 SP1 is not
installed, a maximum of 530 MB of additional free hard
disk space is required for it.
®
For Windows
2000, if .NET Framework 2.0 is not
installed, a maximum of 310 MB of additional free hard
disk space is required for it.
*4: When using USB 3.0 port, it works as USB 2.0.
If the CPU or the memory do not meet the
required specifications, or the type of USB port
or USB hub is USB 1.1, the scanning speed will
slow down.
When the font size is large, some screens may
not be displayed properly. In that case, use a
smaller font size.
The actual increase in used disk space after
installation and the required disk space for
installation may differ from each other
depending on your Windows
management.
®
7 (32-bit/64-bit)
®
(32-bit/64-bit)
®
XP (32-bit) (*1)
®
2000 (*2)
®
®
Pentium
4 1.8 GHz)
(32-bit/64-bit)
7
®
(32-bit/64-bit)
XP (32-bit)
2000
®
system disk
■ Installation
1.
Turn on the computer and log on as a user
with Administrator privileges.
2.
Insert the Setup DVD-ROM into the DVD-
ROM drive.
The [ScanSnap Setup] dialog box appears.
If the [ScanSnap Setup] dialog box does
not appear, double-click
"ScanSnap.exe" in the DVD-ROM via
Windows Explorer.
3.
Click the [Install Products] button.
The [Install Products] dialog box appears.
4.
Click the [ScanSnap] button.
Follow the instructions on the screen to continue
with the installation.
If installation is not completed successfully, click the
[Manuals] button in the [ScanSnap Setup] dialog box,
and then the [Troubleshooting (installation)] button,
and refer to Troubleshooting (installation).
3