Fujitsu 200 Kullanıcı Talimatları

Depolama Fujitsu 200 için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Fujitsu 200 2 sayfaları. Harsh environment case for pencentra 130
Ayrıca Fujitsu 200 için: Kullanıcı Kılavuzu (2 sayfalar), Şartname Sayfası (2 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (2 sayfalar), Kullanıcı Talimatları (1 sayfalar), Kullanıcı Talimatları (1 sayfalar)

Sayfayı Yazdır

FMWCC36

Harsh Environment Case

User's Instructions

PenCentra 130

These instructions provide details on using the

FMWCC36 harsh environment case (HEC). The

HEC provides added protection for your

PenCentra 130 when it is being used, transported,

or stored. Note the following when using the

harsh environment case:

• When charging the pen tablet in the HEC,

suspend the system to avoid overheating .

• To prevent scratches, a screen protector should

be installed on the display window of the HEC.

Two screen protectors are provided with the

HEC. Additional screen protectors can be

obtained using order number FMWSP9

(12-pack).

• If your PenCentra 130 will be used both with and

without the HEC, any screen protector on the

pen tablet can be left in place. However, if the

pen tablet will be used only in the HEC, any

screen protector on the pen tablet should be

removed for better viewing.

• If you use a pen tether, attach it to one of the

D-rings on the back of the case.

Installing the Pen Tablet in the Case

ip the wraparound zipper, and lay the HEC

open flat, as shown in Figure 1.

Wraparound Zipper

Figure 1. Empty PenCentra 130 HEC

9/99

HEC Screen

Position the PenCentra 130 in the back of the case, as

shown in Figure 2. Zip up the wraparound zipper.

Verify that the Record Button extension is positioned

directly over the Record Button.

Figure 2. PenCentra 130 in HEC

Once the system is installed in the HEC, you can either

store the pen in the system pen holder or it can be

stored in the pen holder on the left of the HEC, as

shown in Figure 3.

Pen Holder

Figure 3. Enclosed PenCentra 130

Installing a Screen Protector

1. To ensure good adhesion, clean the exterior surface of

the HEC window with a soft cotton cloth dampened

with denatured alcohol before installing the screen

protector.

Note: Using denatured alcohol to clean the window may

result in streaking when it dries. If streaking occurs,

gently buff the surface with a clean, soft cloth.

Record Button Extension

Record Button

58-0671-00B