Fujitsu ETERNUS DX Disk Yapılandırma Kılavuzu - Sayfa 12

Depolama Fujitsu ETERNUS DX Disk için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Fujitsu ETERNUS DX Disk 43 sayfaları. Server connection, fcoe for linux driver settings for converged network adapter cards
Ayrıca Fujitsu ETERNUS DX Disk için: Kullanıcı Kılavuzu (35 sayfalar), Kullanıcı Kılavuzu (42 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (44 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (29 sayfalar), Yapılandırma Kılavuzu (25 sayfalar), Yapılandırma Kılavuzu (32 sayfalar), Yapılandırma Kılavuzu (35 sayfalar), Yapılandırma Kılavuzu (31 sayfalar), Yapılandırma Kılavuzu (21 sayfalar), Yapılandırma Kılavuzu (24 sayfalar)

Chapter 3

Notes

3.4

HP Serviceguard Notes

3.4

HP Serviceguard Notes

"HP Serviceguard" is HP-UX cluster software. For details on how to configure an HP Serviceguard system, refer

to the relevant HP-UX manual.

3.5

Apply the settings described in this manual for a VM Host, which is an OS for operating Integrity VM.

3.6

Confirm and acquire the ASL required for using the ETERNUS AF/DX storage systems from the following Ver-

•

itas web-site.

https://sort.veritas.com/asl

Install Veritas Array Support Library (ASL) after installing VxVM.

•

For VxVM 5.1 or later

ASL does not need to be installed.

3.7

Notes for Veritas Volume Manager Dynamic Multipathing

(VxVM DMP)

When using the VxVM DMP function, do not use it with a single path configuration.

3.8

Veritas Cluster Server should be installed according to the directions given in the documentation provided

with Veritas Cluster Server.

3.9

Before turning the server on, check that the ETERNUS AF/DX storage systems and Fibre Channel switches are

all "Ready". If the server is turned on and they are not "Ready", the server will not be able to recognize the

ETERNUS AF/DX storage systems.

Also, when the ETERNUS AF/DX power supply is being controlled by a connected server, make sure that the

ETERNUS AF/DX does not shut down before the connected servers. Similarly, the Fibre Channel switches must

also be turned off after the connected servers have been shut down. If turned off, data writes from the run-

ning server cannot be saved to the ETERNUS AF/DX storage systems, and already saved data may also be

affected.

FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX

P3AM-3772-22ENZ0