AEG ARCTIS Kullanım Talimatları Kılavuzu - Sayfa 22

Buzdolabı AEG ARCTIS için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AEG ARCTIS 27 sayfaları. Built-in fridge-freezers
Ayrıca AEG ARCTIS için: Kullanım Talimatları Kılavuzu (32 sayfalar), Kullanım Talimatları Kılavuzu (28 sayfalar), Kullanım Talimatları Kılavuzu (40 sayfalar), Kullanım Talimatları Kılavuzu (28 sayfalar), Kullanım Talimatı (16 sayfalar), Kullanım Talimatları Kılavuzu (36 sayfalar), Kullanım Talimatları Kılavuzu (36 sayfalar), Kullanım Talimatları Kılavuzu (26 sayfalar), Kullanım Talimatları ve Kurulum Kılavuzu (28 sayfalar), Kullanım Talimatları Kılavuzu (36 sayfalar), Kullanım Talimatları Kılavuzu (34 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Kurulum Talimatları Kılavuzu (11 sayfalar), Kullanım Talimatları Kılavuzu (29 sayfalar), Kullanım Talimatları Kılavuzu (23 sayfalar), Kurulum Talimatları Kılavuzu (25 sayfalar), Kurulum Talimatları Kılavuzu (24 sayfalar)

AEG ARCTIS Kullanım Talimatları Kılavuzu
Symptom
Heavy build up of frost,
possibly also on the door
seal.
Unusual noises.
The compressor does not
start immediately after
pressing the FROSTMATIC
button or after changing
the temperature setting.
Important: regularly check on the red temperature pilot light and tem-
perature display to establish that the storage temperature is being
maintained.

Noises during Operation

The following noises are characteristic of refrigeration appliances:
• Clicks
Whenever the compressor switches on or off, a click can be heard.
• Humming
As soon as the compressor is in operation, you can hear it humming.
• Bubbling/Splashing
When refrigerant flows into thin tubes, you can hear bubbling or
splashing noises. Even after the compressor has been switched off,
this noise can be heard for a short time.
Possible Cause
Door seal is not air tight
(possibly after reversing
the door).
Appliance is not level.
The appliance is touching
the wall or other objects.
A component, e.g. a pipe,
on the rear of the appliance
is touching another part of
the appliance or the wall.
This is normal, no error has
occurred.
Remedy
Carefully warm the leaking
sections of the door seal
with a hair dryer (on a
cool setting). At the same
time shape the warmed
door seal by hand such
that it sits correctly.
Readjust the feet.
Move the appliance
slightly.
If necessary, carefully bend
the component out of the
way.
The compressor starts after
a period of time.
67