Fujitsu D3313-S Montaj Talimatları Kılavuzu - Sayfa 10
Anakart Fujitsu D3313-S için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Fujitsu D3313-S 15 sayfaları.
Sayfayı Yazdır
- 1. Table of Contents
- 2. Step 1 Prepare the Chassis
- 3. Step 2 Mount the Cooler
- 4. Step 3 Insert RAM
- 5. Step 4 Put Board in Chassis
- 6. Step 5 Wire HDD
- 7. Step 6 Mount HDD
- 8. Step 7 Add Cross Bar
- 9. Step 8 Close Chassis
- 10. Optional: Application of a Passive Riser Card + Graphic Card AMD W2100
- 11. Step 9 Mount Msata
- 12. Step 10 Insert Passive Riser Card
- 13. Step 11 Add Graphic Card AMD W2100
Assembly Instructions
D3313-S
Step 7 Add Cross Bar
Next, plug in the intrusion cable. On the left of the picture below you can see the plugged in front panel cable.
Then, set the cross bar in its
designated spot on the chassis
__________________________________________________________________________________________________________________________________________________________
Page 10 of 15
At first, plug in the front panel cable coming from the
cross bar.
www.fujitsu.com