Indesit IWE 7168 S Kullanım Kılavuzu - Sayfa 4

Yıkayıcı Indesit IWE 7168 S için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Indesit IWE 7168 S 16 sayfaları. Indesit washer user manual
Ayrıca Indesit IWE 7168 S için: Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (24 sayfalar)

Sayfayı Yazdır

As the colours of the wires in the lead may not correspond

with the coloured markings identifying the terminals in your

plug, proceed as follows:

Connect Green & Yellow wire to terminal marked E or

coloured Green or Green & Yellow.

Connect Brown wire to terminal marked L or coloured Red.

Connect Blue wire to terminal marked N or coloured Black.

If a 13 amp plug (BS 1363) is used it must be fitted with a

13 amp fuse, either in the plug or adaptor or at the distri-

bution board.

If you are in any doubt about the electrical supply to your

machine, consult a qualified electrician before use.

How to connect an alternative plug:

The wires in this mains lead are coloured in accordance with

the following code:

BLUE

BROWN

GREEN & YELLOW

GREEN &

YELLOW

BROWN

BLUE

Disposing of the appliance:

When disposing of the appliance please remove the plug by

cutting the mains cable as close as possible to the plug body

and dispose of it as described above.

The washing machine should not be installed in an outdoor

environment, not even when the area is sheltered, because

it may be very dangerous to leave it exposed to rain and

thunderstorms.

When the washing machine is installed, the mains socket

must be within easy reach.

Do not use extensions or multiple sockets.

The power supply cable must never be bent or dangerously

compressed.

The power supply cable must only be replaced by an au-

thorised serviceman.

Warning! The company denies all liability if and when these

norms are not respected.

NEUTRAL (N)

LIVE (L)

EARTH (E)

13 ampere fuse

CROSS-BAR

CORD GRIP

The first wash cycle

Once the appliance has been installed, and before you use it

for the first time, run a wash cycle with detergent and no lau-

ndry, setting the 90°C programme without a pre-wash cycle.