Indesit mm10k Kullanım Talimatları Kılavuzu - Sayfa 2

Fırın Indesit mm10k için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Indesit mm10k 11 sayfaları.

Installation

Important: The power supply to the appliance must

G B

be cut off before any adjustments or maintenance

work is done on it.

To ensure the proper working order of the built-in

appliance, the kitchen unit must be of a suitable

size.

The sizes of the unit for installing the cooker under a

worktop or in a column unit are shown in figure.

To provide adequate ventilation, there must be

appropriate ventilation openings in the front bottom

and the top part of the cabinet (an intake opening on

the bottom of at least 200 cm2, and an exhaust

opening of at least 90 cm2).

The unit panels next to the cooker must be heat

resistant. In the case of veneered wood units, glues

must be resistant to a temperature of 120 °C.

In accordance with safety standards, once the

appliance has been mounted, there must be no

possible contact with electrical parts. Any protective

parts must be secured so that they can only be

removed with the use of tools.

Before inserting the oven into the cabinet, loosen the

4 rear screws "D" - which fasten the side panels - if

necessary. This will make it easier to move the oven

vertically. The oven should be fastened to the

cabinet through the 4 holes situated on the frame,

using the screws and spacers provided. Once the

oven has been fastened to the cabinet by inserting

and screwing the screws in holes "A" tightly, proceed

as follows:

1) With the oven door open, loosen the six screws

"C" (this way the side panels can slide down);

2) Lower the side panels as much as necessary to

gain access to the 2 holes "B" to fix the oven

permanently;

3) Put the side panels back in place and fasten the

6 screws "C" tightly.