Indesit IO 632 CC RFH Kullanım Talimatları Kılavuzu - Sayfa 6

Hob Indesit IO 632 CC RFH için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Indesit IO 632 CC RFH 20 sayfaları.

Sayfayı Yazdır

Start-up and use

The glue applied on the gaskets leaves traces of

grease on the glass. Before using the appliance, we

recommend you remove these with a special non-

abrasive cleaning product. During the ﬁ rst few hours of

use there may be a smell of rubber which will disappear

very quickly.

A few seconds after the hob is connected to the electricity

supply, a buzzer will sound. The hob may now be switched

on.

Types of noise during normal hob operation:

• Buzz: due to the vibration of the metallic parts that

make up the induction element and the pot; it is

generated by the electromagnetic ﬁ eld required for

heating and increases as the power of the induction

element increases.

• Soft whistle: heard when the pot placed on the

heating zone is empty; the noise disappears once

food or water is placed into the pot.

• Crackle: produced by the vibration of materials on

the bottom of the pot due to the ﬂ ow of parasitic

currents caused by electromagnetic ﬁ elds

(induction); can be more or less intense depending

on the material making up the bottom of the pot, and

decreases as the pot dimensions increase.

• Loud whistle: heard when two induction elements of

the same group function simultaneously at maximum

power and/or when the booster function is set on

the larger element while the other is auto-adjusted.

Noise is reduced by decreasing the power level of

the auto-adjusted induction element; pot bottom

layers made of different kinds of materials are among

the main causes of this noise.

• Fan noise: a fan is necessary to ensure the hob

functions correctly and to safeguard the electronic

unit from possible overheating. The fan functions at

maximum power when the large induction element is

at maximum power or when the booster function is on;

in all other cases, it works at average power depending

on the temperature detected. Furthermore, the fan may

continue to work even after switching the hob off, if the

temperature detected is high.

The types of noise listed above are due to induction

technology and are not necessarily operational faults.

If the

button is pressed for an extended

period of time, the display scrolls quickly though the

power levels and timer minutes.

Switching on the hob

To switch the hob on, press and hold the

approximately one second.

Switching on the cooking zones

Each cooking zone is controlled using a selector button

double

• To begin operating a cooking zone, press the

corresponding control button and set the desired

power level (between 0 and 9) using the buttons

and

Booster function*

The booster function for some of the cooking zones may

be used to shorten heating-up times. It may be activated

by pressing the

above the button will illuminate. This function boosts the

power to 2000 W or 3000 W, depending on the size of

the relevant cooking zone.

The booster stops automatically after 4 minutes. While

the booster for one of the cooking zones is active, the

corresponding front or rear cooking zone will operate

at a reduced power level (e.g. if the booster for the rear

left-hand hotplate has been activated, the power level of

the front left-hand hotplate will be reduced). For further

information, please refer to the Technical description of

the models.

Switching off the cooking zones

To switch off a cooking zone, select it using the

corresponding selector button

• Press the

will progressively decrease until it is switched off.

Programming the cooking duration

! All the cooking zones may be programmed

simultaneously, for a duration between 1 and 99

minutes.

1. Select the cooking zone using the corresponding

selector button.

2. Adjust the power level of the cooking zone.

3. Press the

light corresponding to the selected zone will start

ﬂ ashing.

button for

and a power adjustment device consisting of a

and

button.

Booster

button. The indicator light directly

and:

button: the power of the cooking zone

programming button. The indicator